UZ 12 ultra-light
High Speed Beveler UZ 12 ultra-light
The lightest DOUBLE SIDED PLATE BEVELER with automatic feeding. The beveler is designed and produced by NKO MACHINES and brings a new possibility. During development, the emphasis was on high-quality processing of each part. Machine frame is made of steel, aluminum alloy gearbox, aluminium alloy cabinet and kit for adjustment of angle. All this at a very attractive price
- UZ12 ULTRALIGHT creates welding-ready bevels on linear plates of any shearable material, including iron, steel (up to 60kg/mm2 or 85,000lbs/in²), stainless steel, brass, copper and aluminum. It cuts bevels from 3 to 35mm in thickness, with a minimum plate width of 60 mm and minimum plate length of 60mm.
- Incredibly silent running of the machine.
- The beveling angle adjustable by the help of the kit for needed angle. Available are kits for 30, 45, 37.5, 22.5 and 50 degrees.
- The pressure bar unit and the piece supporting unit can be adjusted in height and are supplied with visible graduated scale.
- It can be hooked to the piece to be machined in either a horizontal or vertical position. The machine can be inverted in order to bevel the bottom side of the plate. Both X and K bevels are possible.
- The total weight of the machine is very low and only one person is necessary for operation of our UZ12 Ultralight
- Inversion allows for creation of a double-sided bevel – no need to rotate or flip heavy material
- Functions as a stationary or a moveable station
|Bevelling machine UZ12 ULTRALIGHT - KIT 30°+ 45°+ 22,5° + 37,5°+ 50°||1918|
|Bevelling machine UZ12 ULTRALIGHT - KIT 30°+ 45°||1922|
|Bevelling machine UZ12 ULTRALIGHT - KIT 30°||1920|
|Bevelling machine UZ12 ULTRALIGHT - KIT 45°||1921|
|Cutter for UZ12||1927|
|Set of 3 cutters - price advantage||1928|