RUR

With respect to its structural and dynamic properties the RUR CNC cutting machine is suitable not only for oxy fuel and conventional plasma cutting but also for High Definition plasma cutting. The RUR is characterized by a substantial fully welded machine frame using a digitally synchronized twin side motion control system fitted to both longitudinal rails of the machine. The machine also incorporates a high level of dynamic automation.

Basic equipment

  • fully welded beam without bolted joints
  • linear bearing in cross axis
  • NEW AC servo-drive system (12 000 mm/min.)
  • digital synchronisation in longitudinal axis
  • NEW PIERCE 15“ control system with touch screen
  • floating cutting heads
  • electric ignition
  • capacitive height control of oxy torch
  • automatic piercing with HI-LOW preheating
  • automatic initial height sensing of plasma torch
  • arc voltage height control of plasma torch
  • parking for 1 head out of cutting area
  • limit switch protection in each axis

Optional equipment

  • NEW PIERCE 19“ control system with touch screen
  • plasma system by customer request
  • linear bearing in longitudinal axis
  • NEW AC servo-drive system (20 –000 mm/min.)
  • automatic gas console
  • torch selection from control panel
  • anti-collision system
  • pneumatic, plasma or ink jet marker
  • air cooling of portal frame
  • control system heating (for winter operation)
  • parking space for 3 torches
TECHNICAL SPECIFICATION
RUR 2500 3000 3500 4000 
max. number of torches 4
rail span 2500 mm 3000 mm 3500 mm 3500 mm
cutting width* - 1 torch 2200 mm 2700 mm 3200 mm 3700 mm 
cutting width* - 2 torches 2200 mm 2700 mm 3200 mm 3700 mm 
cutting width* - 3 torches 2070 mm 2570 mm 3070 mm 3570 mm 
cutting width* - 4 torches 1940 mm 2440 mm 2940 mm 3440 mm 
cutting length by customer request  
min. parallel cut 90 mm  
cutting speed 0 - 12000 (20000) mm/min.  
standard cutting thickness up to 200 mm
machine width 3340 mm 3840 mm 4340 mm  4840 mm
machine length 1320 mm
machine height incl. rails 1700 mm
cutting table height 700 mm
plasma system by customer request
supply voltage 230V/50Hz
*Technical data is valid for the application of oxy-fuel torches. For data of alternative machine configurations, please, contact us.