Saddle & Elbow Cutters
Bug-O Saddle and Elbow Cutters automate the cutting of saddle cuts, offset cuts, laterals, miters, holes and shapes quickly, easily, and economically.
MM-1 Programmable Pipe Cutter
The MM-1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on pipe with diameters from 4" to 16" (10-40 cm). A 4" to 24" (10-61 cm) model is available. It rotates the pipe on its roller bed with a three jaw chuck, while simultaneously moving a cutting torch back and forth along the pipe's axis. Pre-programmed shapes such as saddle, hillside, lateral and miter cuts can be made by simply selecting the type of cut from the menu, then entering the diameters of the pipe and pressing the run button to cut your pipe. There is no need for templates, time consuming layout or calculations to do. In addition, irregular or uncommon shapes can be plotted, programmed and saved for future use.
SE-2PTD Saddle and Elbow Cutter
The SE-2PTD Programmable Pass Through machine provides dual programming capabilities enabling the user to make saddle cuts, offset cuts, laterals, miters, holes, and shapes in pipes. The Programmable Pass Through machine is capable passing pipes from 1" to 4" (25-100mm) through the spindle. Pipes from 4"" to 14"" (100-355mm) can be externally chucked by clamping the I.D. of the pipe. The Programmable Pass Through machine is available for plasma and oxy-fuel cutting and eliminates the need to make templates or layout complex cuts.
SE-4PTD Saddle and Elbow Cutter
The Programmable Pass Through machine automates the end preparation of pipes for fabrication using a program that makes saddle cuts, offset (hillside) cuts, lateral cuts and mitre cuts. The SE-4PTD rotates a pipe held in its three-jaw chuck while driving a cutting torch back and forth along the pipe axis, so that the torch cuts a contour on one pipe to fit onto another pipe of larger diameter. Pipes from 4"" (100 mm) to 12.5"" (318 mm) outside diameter can be chucked internally in the machine. Smaller pipes require optional extension jaws. The SE-4PTD is suitable for plasma and oxy-fuel cutting and eliminates the need to make templates or layout complex cuts.
SE-4PTD Saddle and Elbow Cutter w/3rd Axis
The SE-4PTD is available with a third axis option. An additional third axis-torch rotation is also available.
SE-4PD Programmable Saddle and Elbow Cutter
The SE-4PD is a programmable machine. It will cut saddles, laterals, miters, offsets (hillsides) and elbows using a micro-processor and handheld terminal. Oxyfuel or Plasma may be used. Cutting diameter 1"-12" (25-300 mm). (Maximum length of pipe to be cut, 18" [450 mm]).
PCC-1 Pipe Coupon Cutting Machine
The PCC-1 Pipe Coupon Cutting Machine is a single axis machine used for cutting pipe to a desired length or for beveling the edge of a pipe for weld prep. The machine features a self centering speed chuck capable of gripping 0-8" O.D. pipe and 3-11" I.D. pipe. A racking group supports your plasma or oxy-fuel torch which can be setup for square or beveled cuts up to 12" in length. The variable speed control on the PCC-1 can be adjusted from 1-6 rpm. A rotary ground is included on the plasma version and a quick action manifold is supplied on the oxy-fuel version. The PCC-1 is available in both 110 volt and 240 models.